A hand-set marble mosaic on mesh backing, Marble Mosaic 2x2 is produced to order in our Denizli workshop. Chip format is 2x2. Chips sit on a straight grid, quiet enough to run the full height of a wall without fighting anything else in the room.

Surface and color. Chips are cut and calibrated, then hand-set on mesh to an even joint. Expect gray, blue and white across the sheet. Color comes from the seam the stone was cut from, so shade varies between production runs.

The stone. Marble is metamorphic and dense, which is what lets it take a crisp edge on a chip this small. Nothing here is filled, dyed or resin-backed — the sheet is stone and mesh, and what you see is the stone itself.

Where it works. Most customers use it for a kitchen backsplash or a shower surround; it also works as a fireplace face or a TV-wall panel. For floor use, check the finish against the traffic the room actually takes.

Setting it. Butter the wall rather than the sheet, keep the mesh dry, and align sheets by eye at the seam so the joint disappears. Seal after installation with a breathable impregnating sealer, and again every couple of years in a wet area.

What the photographs show. The flat frame is the technical one — chip size, joint width, color spread. The interior frames answer the question a swatch cannot: what this looks like from across a room.

Ordering. Sheets are $9.99 each and ship at no charge inside the United States. Production and dispatch times are shown on this page; the full schedule is in our Shipping Policy.