Cut from natural travertine and mounted on mesh, Travertine Mosaic 2x2 is made in our workshop in Denizli rather than bought in. Chip format is 2x2. Chips sit on a straight grid, quiet enough to run the full height of a wall without fighting anything else in the room.

Surface and color. Chips are cut and calibrated, then hand-set on mesh to an even joint. Tone runs through beige and gray. Because it is quarried stone rather than a printed ceramic, no two sheets are identical and batches will not match exactly.

The stone. Each sheet is set by hand rather than machine-laid, so the joint stays even where a mechanical setter would drift. Each sheet is set by hand rather than machine-laid, so the joint stays even where a mechanical setter would drift.

Where it works. Common applications are bathroom walls, kitchen backsplashes, powder-room accent walls and exterior façade panels on sheltered elevations. For floor use, check the finish against the traffic the room actually takes.

Setting it. Set it on a flat, primed substrate with a white polymer-modified thin-set; gray adhesive can shadow through a light stone. Plan the layout from the visible corner outward so any cut sheet lands where it is least seen, and dry-lay a few sheets first to mix batches.

What the photographs show. Look at the flat shot first — it tells you the chip size and the joint. Then look at the room shots: a mosaic that reads busy at arm's length often settles down completely once it covers a whole wall.

Ordering. The sheet price is $9.99. US delivery is free; stock is held and dispatched in Connecticut. Production and dispatch times are shown on this page; the full schedule is in our Shipping Policy.